Call us: +91 - 8320898511

Process Water

Process water is the water that comes in contact with any raw material, product, intermediate product, by-product, or waste during any production or industrial process.

Process water treatment shields the wide sort of boiler water or cooling water for heat engine. It should characteristically have a conductivity ranging from 0.1 to 50 uS/cm, with small to no hardness to avoid scaling in heating system. Fresh ground water or tap water is the most reliable source of water to deliver pretreatment process water treatment. Pretreatment includes iron removal, MGF, DMF, Sand Filter, softener, ACF, Ultra Filtration, HRSCC, Tube Settler, Micro-Filtration, De-Alkalizer and Electro- Chlorination.

Process water treatment can be mixed with various technologies, depending on the purity required by the owner.

Mix bed

Standard plan for useful mixed-bed units involves that recovery of the resins to be done inside the same vessel. For this situation it is important to particular the Anion from the Cation resin before the corrosive and acidic recovers are presented.

View Details

EDI Technology

EDI TECHNOLOGY is a water treatment innovation that uses power, ion exchange membranes and resin to deionize water and separate disintegrated particles from water.

View Details

UV Disinfection

UV disinfection is effective at inactivating most viruses, spores, and cysts. UV disinfection is a physical process rather than a chemical disinfectant, which eliminates the need to generate, handle, transport, or store toxic/hazardous or corrosive chemicals.

View Details


Ozone has more sterilization efficiency in contrast to bacteria and viruses compared to chlorination. Because of its outstanding cleansing and oxidation abilities, ozone is extensively used for drinking water treatment.

View Details

DG system

Based on Henry’s law , at a certain temperature and the pressure of water dissolved in a certain amount of gas pressure when the temperature increases or decreases, the amount of gas dissolved in the water reduction ; the contrary, when the temperature decreases or pressure increases , the water will increase the amount of dissolved gas.

View Details


Electrodeionisation element works as EDI technology to create high-leveled purity water. RO EDI process systems interchange conventional Dl mixed bed resins element to create deionized water. RO-EDI System does not require shutdowns to restore the resins with elements or replacing resins.

View Details

Nano Filtration

Nanofiltration is a membrane filtration based method that uses nanometer sized cylindrical through-pores that pass through the membrane at a 90°. Nanofiltration membranes have pore sizes from 1-10 Angstrom, smaller than that used in microfiltration and ultrafiltration, but just larger than that in reverse osmosis.

View Details

SWRO system

SWRO is designed to convert seawater to drinking water, this seawater desolation use high quality SWRO system. These systems use the proven latest technology to give good & safe performance and meet the necessary requirements of the sea atmosphere.

View Details

Reverse osmosis

In simple words Reverse osmosis is a process to get clean water out of dirty water or salt water by forcing water under pressure through a RO membranes used in desalination operate on this principle – to draw fresh water through a semi-permeable membrane from high TDS solutions such as seawater, brackish water, industrial effluent and other sources.

View Details

Electro Chlorination

The product of this process, sodium hypochlorite, contains 0.7% to 1% chlorine. Anything below the concentration of 1% chlorine is considered a non-hazardous chemical although still a very effective disinfectant. In addition, the sodium hypochlorite produced is in the pH range of 6-7.5.

View Details

De – alkalizer

A dealkalizer is similar in respect to softener . Softener is regenerated with salt and in Dealkalizers we have two tanks. First one is a regular softener, containing cationic resin and the second tank contains anionic resin .

View Details

Micro filtration

Microfiltration (MF) works on the principles of filtration processes that operation on a physically separation process for removal of suspended solids and the reduction of turbidity.

View Details

Tube Settler

Tube Settler works on principle of tubular channels and structural zig-zag sheets that reduce particle settling distance and increase the effective settling area in the clarifier or sedimentation basin.

View Details

Ultra filtration

Ultrafiltration works on principle of pressure-driven purification process in which water and low molecular weight substances permeates a membrane while particles, colloids, and macromolecules are filtered.

View Details


HRSCC principle depends upon the effluent coming from outside and mixes with properly with existing floc.

View Details

Filtration Softener

The softener works on principle to removal of hardness from water through ion exchange resin process.

View Details

Iron Removal

Industrial water treatments bring for the customers an incorporating scope of Iron Removal Plant (IR Plant) which is generally utilized for Iron expulsion from water.

View Details

filtration ACF

The ACF works on principle to reduce tastes, odor, chlorine, chloramines, and some organics from water

View Details

Get In Touch